Metal Surface Processor - C4204
Company:
The Boeing Company
Boeing Commercial Airplanes is excited to offer opportunities for a **Metal Surface Processor **to join our Fabrication team in Auburn, Algona and Puyallup, Washington.
As a Metal Surface Processor, you’ll be part of a skilled team responsible for preparing metal components for aerospace applications through specialized surface treatment processes. From cleaning and masking to anodizing and coating, your work will directly support the quality and performance of parts built for flight. This role requires precision, technical ability, and a strong commitment to safety as you work with complex equipment and follow detailed procedures to ensure each component meets exact specifications.
You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.
Position Responsibilities:
- Review the tie-in book or standard operating procedures to understand daily work assignments. Provide comprehensive oral or written shift handoffs to ensure seamless workflow continuity.
- Monitor the workload in the area and coordinate task flow to optimize shop utilization. Proactively report issues or request additional support as necessary.
- Identify, separate, and prepare parts according to work orders and chemical recipes (e.g., alkaline, emulsion, paint strip, sandblast, passivate) prior to racking.
- Conduct thorough inspections of materials to verify proper cleaning, etching, rinsing, and other processes to ensure optimal adhesion and coating quality. Perform visual checks post-process to confirm uniform coverage.
- Apply approved masking materials and coatings based on technical drawings or tooling specifications in preparation for plating or painting operations.
- Determine appropriate racking methods for complex part geometries, ensuring proper contact to prevent burning. Inspect, remove, and report any damaged racks or clips.
- Rack and unrack parts while verifying correct part numbers and chemical processes as per work orders. Ensure no overloading or air pocket formation occurs during handling.
- Operate material handling systems, including cranes, hoists, and carts, safely to transport parts and materials through processing areas.
- Operate and monitor cleaning, Dow Coating, anodizing, dyeing, alodine, and rinsing tanks. Determine correct dip times and maintain appropriate temperatures and solution levels.
- Perform specific treatments such as sulfuric/chromic acid dips on 75 ST parts formed on Cerro Bend. Apply alodine touch-ups or chromadize as required.
- Assist in maintaining chemical strength by accurately measuring and adding solutions. Estimate material surface area to prevent generator overloads.
- Start generators, operate control panels, and utilize overhead cranes to load/unload tanks and transfer processed items between stations.
- Strip anodizing from racks using caustic soda and nitric acid. Clean tanks, crocks, and equipment to ensure safe and efficient operations.
- Mark, oil, wrap, and route completed parts according to drawings or work orders. Ensure correct parts are matched to work orders and transferred to Quality Assurance (QA) for inspection.
- Handle and dispose of hazardous materials (e.g., alodine, acids, solvents) in accordance with safety procedures. Complete all required on-the-job training and maintain necessary certifications.
Physical Demands and Potential Hazards:
- Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
- Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
- Work in environments that may involve contact with metals, solvents, and coolants.
- Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
- Adapt to varying noise levels and atmospheric conditions.
- Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
- 1+ years of experience using basic math (e.g. addition, subtraction, multiplication and division).
- 1+ years of experience or training reading and interpreting drawings or blueprints.
- 1+ years of experience working with hazardous materials.
- Must be able to lift, push and pull up to 35 pounds
Preferred Qualifications:
- Experience operating cranes.
Typical Education & Experience:
- High school graduate or GED preferred.
Relocation:
- Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
- This position is for a variety of shifts.
Total Rewards & Pay Transparency
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
**Pay: **$24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Language Requirements:
English
Education:
Not Applicable
Relocation:
Relocation assistance is not a negotiable benefit for this position.
Export Control Requirement:
Safety Sensitive:
Security Clearance:
This position does not require a Security Clearance.
Visa Sponsorship:
Employer will not sponsor applicants for employment visa status.
Contingent Upon Award Program
This position is not contingent upon program award
Shift:
Shift 4 (United States of America)
Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
EEO is the law
Boeing EEO Policy
Request an Accommodation
Applicant Privacy
Boeing Participates in E – Verify
- E-Verify (English)
- E-Verify (Spanish)
**Right to Work Statement **
- Right to Work (English)
- Right to Work (Spanish)